Please do not swash the roller bracket with water.
Please clean the mecanum wheels of robot .
Bumper’s sponge of the new robot should be take out when it works.
Step1: Aim the remote toward the robot and press the “CLEAN” button to wake the robot when it is in sleeping mode. You will hear 1
Step2: While still aiming the remote toward the robot, set the schedule time on the remote that you want the robot to begin cleaning.
Step3: When you are done setting the time, press the “PLAN” button on the remote to save your schedule program. You will hear 1
“beep” tone if you have successfully completed the schedule setting program.
Note: When you are using the remote to schedule a cleaning time, make sure the remote is
close to the robot, or you will not be able to successfully use the scheduling feature. After using the schedule setting feature, ensure
the robot is always powered on, otherwise the schedule setting will not work.
If you want to cancel the schedule time, adjust the time to 00:00.
Make sure that the power switch on the robot is set to “ON.” If the robot is still not working, it may have ran out of power and will need
to be manually placed on the charging base.
Toll free for North America: 1-800-631-9676
Mon - Fri: 9:00 A.M. - 5:00 P.M. CST
Ourside North America: +86-75521005927
Mon - Fri: 9:00 A.M. - 6:00 P.M.
Sat: 9:00 A.M. - 12:00 A.M. GMT+8
Technical Support firstname.lastname@example.org
Monday-Friday 9:00 A.M. - 18:00 P.M.
Saturday 9:00 A.M. - 12:00 A.M. (GMT +8）